Not sure which system is right for you? Compare our line of Effluent or Carcass systems.

Efficient Sterilization Systems,
Small or Large Volumes

The AutoFlow™ is designed for multi-purpose processing and production facilities with biowaste effluent, with low solids content – perfect for cell cultures.

  • high throughput- 500 to 6,000+ liters per hour
  • small batch models available – 500 to 4,000 liters per day
  • high efficiency – low install, low operating cost
  • fully automatic – easy to use, continuous operation
  • compact design – modular, flexible, energy efficient
  • hygienic construction – manufactured to GMP standards
  • safe, reliable operation – self-cleaning CIP, sterile filter options

Efficient Sterilization Systems,
Small or Large Volumes

Available in Both Continuous or Batch Technology

To accommodate the flow rate of your facility, AutoFlow can be available in two very different, distinct technologies – Sequential Batch (SB) or Continuous Flow (CF). With the AutoFlow SB, flow rates are typically very small, and calculated on a daily basis, while the AutoFlow CF handles very large volumes, and is calculated on an hourly flow rate.

 autoflow-multiple-sizes2

Fully Automated, Compact Footprint

AutoFlow™ is designed for the safety of laboratory staff. It is fully automated, and does not require any operator contact with the system.

  • effluent sterilization with adjustable treatment temperature up to 150 degrees C
  • PLC-controlled treatment and cleaning
  • simple connections allow for unit mobility as needed
  • constructed of lab-safe materials
  • low energy consumption
  • environmentally friendly

Fully Automated, Compact Footprint

Built for Safety & Control

Clean-In-Place, Automatic Mode, Data Recording

Clean-In-Place, Automatic Mode, Data Recording

The advanced PLC control module provides automatic operation and monitoring of the entire system, including data logs, alarms, and sensor information.  The touchscreen control panel can be mounted directly to the unit, or remotely, depending upon customer needs.

  • visual graphic representation of operation
  • simple automatic mode – runs continuously
  • chemical clean-in-place to maintain full flow
  • steam sterilization of individual components
  • leak detection system: alarms and visual controls
  • system alarms for valves, sensors, temperature pressure, and liquid levels
  • recording and trending of treatment data
  • password-protected operating parameter, set-point control
  • fail safe system shutdown in case of energy failure
  • optional redundant pumps

  • visual graphic representation of operation
  • simple automatic mode – runs continuously
  • clean-in-place steam sterilization
  • leak detection system alarms
  • alarms for valves, sensors, temperature, pressure and liquid levels
  • recording and trending of treatment data
  • password-protected operating, setpoint control
  • failsafe shutdown in case of energy failure
  • optional redundant pumps

Built for Safety & Control

High Quality Construction

316L SS, GMP Standards, Orbitally Welded, Sanitary Fittings

316L SS, GMP Standards, Orbitally Welded, Sanitary Fittings

Each of our AutoFlow systems are designed to meet GMP standards, and are constructed out of high grade 316L stainless steel. Systems are welded using an orbital welder in a dedicated space to maintain a clean environment.

Additionally, each system uses sanitary gasketed tri-clamp fittings, to prevent exposed threaded connections.

High Quality Construction

Available Sizes

Model Capacity
(Daily or Hourly)
BSL Heat Type
AFs-500 500 LPD (132 Gal) 1, 2, 3 Electric
AFs-1000 1000 LPD (264 Gal) 1, 2, 3 Electric
AFs-2000 2000 LPD (528 Gal) 1, 2, 3 Electric or Steam
AFs-4000 4000 LPD (1057 Gal) 1, 2, 3 Electric or Steam
AFc-500 500 LPH (132 Gal) 1, 2, 3 Steam
AFc-1000 1000 LPH (264 Gal) 1, 2, 3 Steam
AFc-2000 2000 LPH (528 Gal) 1, 2, 3 Steam
AFc-4000 4000 LPH (1057 Gal) 1, 2, 3 Steam
AFc-6000 6000 LPH (1585 Gal) 1, 2, 3 Steam

Available Sizes

Looking for a compact, point-of-use sterilization solution?

AutoFlow™ Sink

AutoFlow™ Sink

The AutoFlow™ Sink system is designed specifically for small laboratories, as a point-of-use application, where full size systems may not be practical, or volumes are small. If you are interested in learning more about the AutoFlow™ Sink, get in touch with us!

Looking for a compact, point-of-use sterilization solution?

Technical Specifications

Biosafety Classifications: BSL-2, BSL-3, BSL-3+
Flow Rate (CF): from 500 to 6000+ Liters Per Hour
Flow Rate (SB): from 500 to 4000 Liters Per Day
Power Requirements: 480v/3ph (others available to meet client needs)
Chilled Water Supply: yes (variable based upon requirements)
Soft Water Supply:  yes (variable based upon requirements)
Compressed Air Supply: 90 PSIG
Steam Supply: yes (variable based upon requirements)
Controls: PLC, color touchscreen, HMI data logging of processes

 Downloads:

brochure-button
spec-sheet-button
AutoFlow CF
spec-sheet-button
AutoFlow SB
spec-sheet-button
AutoFlow Sink