Not sure which system is right for you? Compare our line of Effluent or Carcass systems.

Sequential batch, low-temp, economical, low cost decontamination.

The ThermoDecoN™ provides an effective, economical solution for effluent decontamination, at facilities where costs and utility resources are a chief concern.  For simplicity of maintenance and reduction of ongoing costs, ThermoDecoN™ components are available worldwide.

  • Fully automated sequential batch processing
  • High level disinfection- 10-6 B Atrophaeus/Subtilis
  • Operating capacity: 378L (100 G) to 3,028L (400 G)
  • Simple controls – no PLC
  • Adjustable electronic temperature control up to 96˚C (205 ˚F)
  • Adjustable electronic timer to ensure effective “hold time”
  • NEMA 4 control cabinet
  • Simple utilities: (220V / Single Phase)
  • No air, no steam, no water needed (water recommended)
  • Chemical injection port for CIP
  • Gravity discharge to sewer at < 60˚C (140 ˚F)

Sequential batch, low-temp, economical, low cost decontamination.

Economical, Efficient Process

The ThermoDecoN offers a simple, easy-to-understand operation. The batch operation provides flexibility for different types of waste streams, and treats effluent in an automatic operation as the un-treated effluent is produced.

  1. Un-treated effluent enters the system from your process
  2. The effluent is heated in the Treatment Tank (<100°C)
  3. Effluent is held at temperature for the time selected by the user
  4. Once treatment is completed, effluent is transferred into the cooling tank
  5. Cooled effluent is discharged by gravity

Economical, Efficient Process

ThermoDecoN Decontamination Process

Designed for Simplicity

The modular design, combined with the batch operation of the ThermoDecoN makes it an easy system
to understand and operate. It also makes the configuration and product selection process easy, with
fewer decisions needed to choose the right system for you.

ThermoDecoN Inside View

Designed for Simplicity

The modular design, combined with the batch operation of the ThermoDecoN makes it an easy system to understand and operate. It also makes the configuration and product selection process easy, with fewer decisions needed to choose the right system for you.

thermodecon-inside-views-monbile

Configurations & Options

The small batch design of the ThermoDecoN™ allows for simple configurations. Tanks include Treatment, Collection, and Cooling.  At it’s smallest configuration, the Treatment Tank doubles as a Cooling Tank.  Additional collection and cooling tanks can be added to accommodate larger volumes and faster processing, cooling of batches.

Options Include:

  • digital process logger with USB port
  • cooling water injection port
  • discharge/lift pump
  • sterile vent filters

Configurations & Options

ThermoDecoN Modular Configurations

Technical Specifications:

Biosafety Classifications: BSL-2, BSL-3, BSL-3+
Daily Treatment Capacity: 378L (100 G) to 1,514L (400 G) with cooling water injection option
Power Requirements: 12 KW, 210-240 V, 50/60 Hz, single phase
Controls: NEMA 4 cabinet push button relays, electronic thermostat and timer
Treatment, Collection and Cooling Tanks: 378 L (100 G), 304 L SS
Utilities Required: Electricity
Footprint (Width, Length, Height): millimeters: 915 W x 1650 L x 1070/2135/3200 H
inches: 36 W x 65 L x 42/84/126 H

Biosafety Classifications: BSL-2, BSL-3, BSL-3+
Daily Treatment Capacity: 378L (100 G) to 1,514L (400 G)
Power Requirements: 12 KW, 210-240 V, 50/60 Hz, single phase
Controls: NEMA 4 cabinet push button relays, electronic thermostat and timer
Treatment, Collection and Cooling Tanks: 378 L (100 G), 304 L SS
Utilities Required: Electricity
Footprint (Width, Length, Height): millimeters: 915 W x 1650 L x 1070/2135/3200 H
inches: 36 W x 65 L x 42/84/126 H

Downloads: 

brochure-button spec-sheet-button